Necta

New Left Photocell for Necta Sfera / Snakky / Rondo / Samba (6735-432-00) – warranty Why Choose Our Photocell Over the Original? Our photocell delivers better quality at a lower price: Lower price — costs significantly less than the generic one Premium components — high-quality infrared receivers by Osram Intelligent algorithm — Advanced Autotune Calibration for superior performance in real-world conditions 24-month warranty Photo of a photocell transmitter(right side) ...

New Left Photocell 255549 for Necta Sfera / Snakky / Rondo / Samba (6735-486-01) – warranty Why Choose Our Photocell Over the Original? Our photocell delivers better quality at a lower price: Lower price — costs significantly less than the generic one Premium components — high-quality, powerfull 125mW infrared transmitters that last significantly longer 24-month warranty Photo of the left transmitter photocell Price & Lead Time Price : 29 EUR net ...

Repair of Evoca 266124 Mainboard: Artico, Festival, Tango, Brio, Soprano, Swing, Twist, Vivace, Melodia, Barista, Gusto Fast and effective repair of the mainboard (CPU) in popular Necta vending machines. Photo of Evoca 266124 CPU board The Evoca mainboard with catalog number 266124 is a modern-generation control board used in a wide range of Necta vending machines. Necta vending machine models where this board is found Artico S / Artico L Festival / Festival Classic Tango Brio Key Lavazza Soprano Swing Twist Vivace Melodia Barista 300 Gusto 6C / Gusto 8C / Gusto Drum Most common faults of the Evoca 266124 mainboard The board does not start at all (no LEDs, no reaction after power-on) Detects incorrect number of shelves or fails to control them properly Spins multiple spirals at once when dispensing a product Does not detect the selected shelf / column No communication over MDB bus (machine does not respond to coin mech or payment terminal) How to diagnose the Evoca 266124 mainboard Check the power supply voltage at the board input (green connector) – it should be 24V DC, and LEDs LD1, LD2, LD3 should be lit. Check if LED LD4 is blinking – if not, this indicates a board failure. Pay attention to whether the board detects the correct number of shelves / spirals at startup. If not – the board is likely faulty and there is a short circuit somewhere in the wiring harness to the shelves: Inspect the wiring harnesses for abrasion. Often wires get caught in shelf guides and suffer mechanical damage. Check if the motor pins driving the spirals are touching the metal back wall of the machine and ensure they are properly insulated. IMPORTANT: This check is critical! Customers often send us boards without fixing the root cause in damaged wiring, leading to repeat failure (not covered by warranty). If the board starts – enter service mode, run spiral and dispense tests. The spiral motor should respond to on/off commands, and spirals should turn individually during dispensing. If there is no communication with the coin mech – check payment system settings. If incorrect – most likely a dead backup battery; the machine starts with default settings. Measure battery voltage: a new battery shows 3V, it should not drop below 2V – replace if lower. Note: if you lack proper soldering equipment or experience – you risk damaging the board. We can do this for you. If settings are correct and you have a payment system – check the MDB/Executive jumper settings. If correct – disconnect the payment system and connect the coin mech directly to the board connector – if the board still shows “no change” – the fault is in the board. Price and lead time Price : 93 EUR net ...

Repair of Necta Actuator Board Samba Top / Rock (ACT 6735-558-00) Repair of Necta actuator board 6735-558-00 for Samba Top and Rock vending machines Photo of Necta Samba Top actuation board The Necta actuator board (part number 6735-558-00) is the actuation (control) module primarily responsible for operating the product dispensing motors in Samba Top and Necta Rock models. Its failure is a very common cause of issues with product dispensing. ...

Repair of Necta Festival Actuator Board Fast and effective repair of the board controlling sliders in Necta Festival vending machines. Image of a Necta Festival actuation card The actuator board in Necta Festival is responsible for operating the sliders (sliding doors that allow accessing products from the product’s disk). Its faults are a very common cause of improper door operation and overall machine malfunction. Most common faults of Necta Festival actuator board Blown fuse - the fuse on the board burns out immediately after power is supplied or during an attempt to open a slider Sliders do not open - sliders remain closed despite product selection Flashing “Slider opening” message - during an attempt to open, the main display continuously flashes the message “Slider opening” (the machine does not detect the open position) How to diagnose The board is mounted on the inside of the large door (the door for the disc trays), in the lower section, beneath the metal shield/cover. ...

Repair of Necta Main Board 6735/536/02 - Sfera, Snakky, Rondo, Astro, Kikko Fast and effective repair of the main CPU board in popular Necta vending machines. The Necta main board with catalog number 6735/536/02 (also referred to as 6735-536-02) is the core control board used in a wide range of compact and medium-sized Necta models. Photo of the Necta main board 6735/536/02 Necta machine models where this board is commonly found Sfera Snakky / Snakky Max / Snakky SL / Mini Snakky Rondo Astro Kikko / Kikko Max / Kikko RY Oblo Brio 3 Kobalto Konvivio Most common faults of Necta main board 6735/536/02 The board does not start at all (no LEDs on, no response after powering on) Incorrect detection of shelf quantity or improper shelf control Multiple motors start simultaneously when dispensing a product Display not working (black screen or #### characters) Freezes during photocell test Does not detect the selected shelf/column No communication with coin mech (machine does not respond to coin mech or payment terminal) How to diagnose Necta main board 6735/536/02 Check the input power supply - it should be stable 24V AC, and the orange LED “PWR” on the board should light up. Check whether the green LED “RUN” on the board is blinking. No blinking (or constant/solid “RST” red LED) usually indicates a board failure. If the board starts but freezes during the photocell test → the board is faulty. Pay attention to whether the board correctly detects the number of shelves/springs at startup. If not → the board is likely damaged, and there is a short circuit somewhere in the wiring harness to the shelves: Check if any wiring harnesses are worn or damaged (often they get caught in the shelf guides) Check if the motor pins for the springs are not touching the metal rear wall of the machine and are properly insulated NOTE: This check is extremely important! From our experience, it happens customers send us damaged boards without fixing the short circuit within the machine, and the board fails again shortly after repair (not covered by warranty). If the board starts → go to the service menu and run compressor and product dispensing tests. The compressor should respond to on/off commands, and each spring should rotate individually when dispensing. If there is no communication with the coin validator → check the payment system settings. If incorrect → the backup battery is likely dead and the machine boots with default settings. If settings are correct and you have a payment system → check the MDB/Executive switch jumper settings. If correct → disconnect the payment system and connect the coin validator directly to the board connector - if the board still shows “no change” → the board is faulty. Price and turnaround time Price : 93 EUR net ...

Repair of Necta Main Board 6735-556-02 - Canto, Concerto, Festival, Opera, Samba Fast and effective repair of the main board in elegant Necta vending machines with graphic displays. Photo of a Necta main board 6735-556-02 The Necta main board with designation 6735-556-02 (sometimes denoted as 6735/556/02) is the core control module in many mid- and high-range models from Necta and N&W Global Vending. Unlike older boards, it works with several modern, elegant graphic displays. ...

Repair of Necta Opera Actuator Board 6735-575-00 Fast and effective repair of the board controlling dispensers and mixer in Necta Opera coffee machines. The Necta actuator board (part number 6735-575-00) controls the coffee dosing arm, mixer, and dispensers in Necta Opera vending machines. Its failure is one of the most common causes of problems with dispensing beverages. Photo of the Necta Opera actuator board 6735-575-00 Most common faults of Necta Opera actuator board 6735-575-00 The board does not start - no response after powering on the machine, control LEDs do not light up No movement of the dosing arm - dosing arm error message on the display Mixer/dispenser not starting - coffee is not mixed or dispensed despite command Mixer/dispenser running continuously - the mixer keeps spinning or dispensing does not stop How to diagnose faults of Necta Opera actuator board 6735-575-00 Power on the machine. Check the error list and run the machine tests from the service menu. Price and turnaround time Price : 93 EUR net ...